Nissan GT-R R35 is a great performance car, but still ride height designed for street use and go over speed bumps without bottoming. Lowering the car would give more grip and better handling, but then the factory designed kinematics wouldn’t work as it supposed to. If kinematics is out of range, then it decreases mechanical grip and also influences aerodynamical grip as kinematics supports less roll, squat and pitch. The Wisefab kit would bring the RC, bump steer and camber curve back to normal range, providing better roll stiffness, better handling and grip.
Dual kinematics setup. Uprights have points for lowered ride height with standard 710mm (28“) diameter wheels and second set of points for either small wheels with lowered ride height that are required at some series or for standard wheel with standard ride height.
7075-T6 aluminum billet CNC knuckles with optimized design provide low weight and high strength.
CrMo rod ends and sphericals used instead of rubber bushings
Easy camber adjustments
The standard 20“ or 18“ racing wheel can be used.
R35 CV joints are good to handle big power, but for any case if power and grip exceed their limits, then the uprights have room for bigger CV joint if needed.