Sikky Headers
Sikky Nissan 350z LSx Swap Headers – 1 3/4″ Mild Steel
Regular price $630.00Description
Sikky headers allow perfect drop-in fitment in the Nissan 350Z with a Sikky LSx (Ls1 / LS2 / LS3 / LS6 / LS7) Swap Kit using a T-56 Transmission.
- Nissan 350Z/Infiniti G35 1 3/4″ Primaries 3″ Collector, Mild Steel
- 1 O2 Sensor Bung Installed per Header
- Includes New Gaskets and Bolts
Recommended for street use (less than 500 WHP)
*The black coating will burn off. It is only applied so that the parts do not rust during storage and transit.
Fitment Notes:
All Sikky chassis specific swap headers are designed around using the Sikky mount kits and components. We cannot guarantee or confirm fitment when used in conjunction with a competitors product. Double check the required components section to see if anything else is needed for proper fitment. If you are unsure, contact one of our knowledgeable sales reps at sales@akwyr.co
Sikky BMW E36 LSx Swap Headers – 1 3/4″ Stainless Steel
Regular price $1,080.00
Description
Sikky headers allow perfect drop-in fitment in the BMW E36 with a Sikky LSx (LS1 / LS2 / LS3 / LS6 / LS7) Swap Kit using a T-56 Transmission.
- BMW E36, 1 3/4″ Primaries, 3″ Collector, Stainless Steel
- V-Band Flange Pre-Installed (clamp and other half included)
- Includes New Gaskets and Bolts
- Recommended for street use (less than 500 WHP)
Fitment Notes:
For proper header fitment you will need to use aftermarket eye ball arms (rear attachment point for lower control arm) as well as Sikky’s low profile steering shaft. Learn more about the Sikky Low Profile Steering Shaft.
All Sikky chassis specific swap headers are designed around using the Sikky mount kits and components. We cannot guarantee or confirm fitment when used in conjunction with a competitors product. Double check the required components section to see if anything else is needed for proper fitment. If you are unsure, contact one of our knowledgeable sales reps at sales@akwyr.co
Sikky Nissan 240sx LSx Swap Headers – 1 3/4″ Mild Steel
Regular price $630.00Description
Sikky headers allow perfect drop-in fit in the Nissan S13 or S14 with a Sikky LSX Swap Kit using a T-56 Transmission.
- 1 3/4″ Primaries 3″ Collector, Mild Steel
- 1 O2 Sensor Bung Installed per Header
- Includes New Gaskets and Bolts
- Recommended for street use (less than 500 WHP)
* Note: The black coating will burn off. It is only applied so that the parts do not rust during storage and transit.
Fitment Notes:
All Sikky chassis specific swap headers are designed around using the Sikky mount kits and components. We cannot guarantee or confirm fitment when used in conjunction with a competitors product. Double check the required components section to see if anything else is needed for proper fitment. If you are unsure, contact one of our knowledgeable sales reps at sales@akwyr.co
Sikky BMW E30 LSx Swap Headers – Stainless Steel Pro Series
Regular price $1,180.00
Description
Sikky E30 Pro Series headers allow perfect drop-in fitment in the BMW E30 with a Sikky LSx (LS1 / LS2 / LS3 / LS6 / LS7) Swap Kit. These all stainless steel headers are a completely new design from our original E30 headers and are for the customer that wants the very best header they can get. With no expense spared in the design and construction of these headers they will make great power and last forever.
- 100% stainless steel construction
- Massive 1 7/8” primaries
- High flow collectors with merge bullets
- CNC head flanges
- Comes with v-band flange welded to the collector and the complete v-band clamp and flange assembly.
- Tig welded and back purged for super strong and reliable weld
- Fits with any transmission combination
Fitment Notes:
All Sikky chassis specific swap headers are designed around using the Sikky mount kits and components. We cannot guarantee or confirm fitment when used in conjunction with a competitors product. Double check the required components section to see if anything else is needed for proper fitment. If you are unsure, contact one of our knowledgeable sales reps at sales@akwyr.co
Sikky Hyundai Genesis LSx Swap Headers – Stainless Steel Pro Series
Regular price $1,080.00
Description
- 100% stainless steel construction
- Massive 1 7/8” primaries
- High flow collectors with merge bullets
- V-band flange pre welded on the collector (other half and clamps included)
- CNC stainless steel head flanges
- Tig welded and back purged for strong and reliable welds
- works with any transmission combination
Fitment Notes:
All Sikky chassis specific swap headers are designed around using the Sikky mount kits and components. We cannot guarantee or confirm fitment when used in conjunction with a competitors product. Double check the required components section to see if anything else is needed for proper fitment. If you are unsure, contact one of our knowledgeable sales reps at sales@akwyr.co
Sikky Infiniti G35 LSx Swap 1 7/8″ Ceramic Headers
Regular price $980.00
Description
Sikky headers allow perfect drop-in fitment in the G35 with a Sikky LSX Swap Kit using a T-56 Transmission. The coating we use is a high performance aluminum ceramic coating.
- Infiniti G35 1 7/8″ Primaries 3.5″ Collector, Mild Steel, Ceramic Coated Header
- 1 O2 Sensor Bung Installed per Header
- V-Band Flange Pre-Installed (clamp and other half included)
- Includes New Gaskets and Bolts
The process in which each header is coated:
- Each part is thermal degreased at 750 degrees for 3 hours to remove any impurities and contaminates. This is the most effective way to clean parts.
- After thermal, each part goes through a series of blast, on all surfaces.
- Once a surface profile is created, the entire part is hand sprayed with Aluminum Ceramic coating.
- After the part is covered, it is put in the oven (60’ long) and cured at 750 degrees for 2 1/2 hours.
- When curing is complete, each part is polished in a vibratory polisher. Using special Ceramic beads, a special soap and water, the part is burnished (polished) to a high luster.
- After polish, it receives a wipe down and inspection before going to shipping.
- 3 year warranty on coatings for corrosion, etc.
Recommended for drag/street use (making 600 WHP)
Fitment Notes:
All Sikky chassis specific swap headers are designed around using the Sikky mount kits and components. We cannot guarantee or confirm fitment when used in conjunction with a competitors product. Double check the required components section to see if anything else is needed for proper fitment.
Sikky Infiniti G35 LSx Swap 1 7/8″ Headers
Regular price $680.00
Description
Sikky headers allow perfect drop-in fitment in the G35 with a Sikky LSX Swap Kit using a T-56 Transmission.
- Infiniti G35 1 7/8″ Primaries 3.5″ Collector, Mild Steel
- 1 O2 Sensor Bung Installed per Header
- Includes New Gaskets and Bolts
Recommended for drag/street use (making 600 WHP)
Fitment Notes:
All Sikky chassis specific swap headers are designed around using the Sikky mount kits and components. We cannot guarantee or confirm fitment when used in conjunction with a competitors product. Double check the required components section to see if anything else is needed for proper fitment. If you are unsure, contact one of our knowledgeable sales reps at sales@akwyr.co
Sikky Infiniti G35 LSx Swap 1 3/4″ Ceramic Coated Headers
Regular price $930.00
Description
Sikky headers allow perfect drop-in fitment in the G35 with a Sikky LSX Swap Kit using a T-56 Transmission. The coating we use is a high performance aluminum ceramic coating.
- Infiniti G35 1 3/4″ Primaries 3″ Collector, Mild Steel, Ceramic Coated Header
- 1 O2 Sensor Bung Installed per Header
- V-Band Flange Pre-Installed (clamp and other half included)
- Includes New Gaskets and Bolts
The process in which each header is coated:
- Each part is thermal degreased at 750 degrees for 3 hours to remove any impurities and contaminates. This is the most effective way to clean parts.
- After thermal, each part goes through a series of blast, on all surfaces.
- Once a surface profile is created, the entire part is hand sprayed with Aluminum Ceramic coating.
- After the part is covered, it is put in the oven (60’ long) and cured at 750 degrees for 2 1/2 hours.
- When curing is complete, each part is polished in a vibratory polisher. Using special Ceramic beads, a special soap and water, the part is burnished (polished) to a high luster.
- After polish, it receives a wipe down and inspection before going to shipping.
- 3 year warranty on coatings for corrosion, etc.
Recommended for street use (less than 500 WHP)
Fitment Notes:
All Sikky chassis specific swap headers are designed around using the Sikky mount kits and components. We cannot guarantee or confirm fitment when used in conjunction with a competitors product. Double check the required components section to see if anything else is needed for proper fitment. If you are unsure, contact one of our knowledgeable sales reps at sales@akwyr.co
Sikky Infiniti G35 LSx Swap 1 3/4″ Headers
Regular price $630.00
Description
Sikky headers allow perfect drop-in fitment in the G35with a Sikky LSX Swap Kit using a T-56 Transmission.
- Infiniti G35 1 3/4″ Primaries 3″ Collector, Mild Steel
- 1 O2 Sensor Bung Installed per Header
- Includes New Gaskets and Bolts
Recommended for street use (less than 500 WHP)
Fitment Notes:
All Sikky chassis specific swap headers are designed around using the Sikky mount kits and components. We cannot guarantee or confirm fitment when used in conjunction with a competitors product. Double check the required components section to see if anything else is needed for proper fitment. If you are unsure, contact one of our knowledgeable sales reps at sales@akwyr.co
Sikky Lexus SC400 LSx Swap Headers – 1 7/8″ Stainless Steel Pro Series
Regular price $930.00
Description
Sikky Pro Series headers allow perfect drop-in fitment in the Lexus SC400 with a Sikky LSx (LS1 / LS2 / LS3 / LS6 / LS7) Swap Kit.
- CNC mandrel bent 1 7/8″ Primaries
- 3″ Collector and merge bullets for maximum flow
- 100% Stainless Steel Construction
- V-Band Flange Pre-Installed (clamp and other half included)
- Includes New Gaskets and Bolts
- works with any transmission combination
Fitment Notes:
All Sikky chassis specific swap headers are designed around using the Sikky mount kits and components. We cannot guarantee or confirm fitment when used in conjunction with a competitors product. Double check the required components section to see if anything else is needed for proper fitment. If you are unsure, contact one of our knowledgeable sales reps at sales@akwyr.co
Sikky Lexus SC300 LSx Swap Headers – 1 7/8″ Stainless Steel Pro Series
Regular price $930.00
Description
Sikky Pro Series headers allow perfect drop-in fitment in the Lexus SC300 with a Sikky LSx (LS1 / LS2 / LS3 / LS6 / LS7) Swap Kit.
- CNC mandrel bent 1 7/8″ Primaries
- 3″ Collector and merge bullets for maximum flow
- 100% Stainless Steel Construction
- V-Band Flange Pre-Installed (clamp and other half included)
- Includes New Gaskets and Bolts
- works with any transmission combination
Fitment Notes:
All Sikky chassis specific swap headers are designed around using the Sikky mount kits and components. We cannot guarantee or confirm fitment when used in conjunction with a competitors product. Double check the required components section to see if anything else is needed for proper fitment. If you are unsure, contact one of our knowledgeable sales reps at sales@akwyr.co
Sikky Lexus RCF Headers
Regular price $1,880.00
Description
Sikky Manufacturing has spent the last year testing and developing a new design of our popular Lexus RCF exhaust header. Our challenge was to design and build the ultimate header from the ground up. Highest power gain, perfect fitment and supreme craftsmanship were our goals.
This completely new header consists of the following key attributes.
- 100% stainless steel construction
- Massive 1 7/8” primaries
- High flow collectors with merge bullets
- CNC head flanges
- CNC collector flange with machined pocket for gasket
- Tig welded
- Extremely tight tolerance for perfect fitment every time
Knowing all too well the typical dyno debates we were careful to do all testing back to back. We even had testing done on a third parties dyno for impartial results. Confirming what we found on our dyno and ensuring you will get the same results. Needless to say we spent hundreds of hours making sure this header would be able to have and hold the title of the best header on the market for some time to come.
Sikky Lexus ISF Headers
Regular price $1,880.00
Description
Sikky Manufacturing has spent the last year testing and developing a new design of our popular Lexus ISF exhaust header. Our challenge was to design and build the ultimate header from the ground up. Highest power gain, perfect fitment and supreme craftsmanship were our goals.
This completely new header consists of the following key attributes.
- 100% stainless steel construction
- Massive 1 7/8” primaries
- High flow collectors with merge bullets
- CNC head flanges
- CNC collector flange with machined pocket for gasket
- Tig welded
- Extremely tight tolerance for perfect fitment every time
Knowing all too well the typical dyno debates we were careful to do all testing back to back. We even had testing done on a third parties dyno for impartial results. Confirming what we found on our dyno and ensuring you will get the same results. Needless to say we spent hundreds of hours making sure this header would be able to have and hold the title of the best header on the market for some time to come.
Sikky Lexus GSF Headers
Regular price $1,980.00
Description
Sikky Manufacturing has spent the last year testing and developing a new design of our popular Lexus GSF exhaust header. Our challenge was to design and build the ultimate header from the ground up. Highest power gain, perfect fitment and supreme craftsmanship were our goals.
This completely new header consists of the following key attributes.
- 100% stainless steel construction
- Massive 1 7/8” primaries
- High flow collectors with merge bullets
- CNC head flanges
- CNC collector flange with machined pocket for gasket
- Tig welded
- Extremely tight tolerance for perfect fitment every time
Knowing all too well the typical dyno debates we were careful to do all testing back to back. We even had testing done on a third parties dyno for impartial results. Confirming what we found on our dyno and ensuring you will get the same results. Needless to say we spent hundreds of hours making sure this header would be able to have and hold the title of the best header on the market for some time to come.
Sikky Mazda RX7 Pro Series LSx Swap 1 7/8″ Headers
Regular price $930.00Description
Sikky headers allow perfect drop-in fitment in the Mazda FD RX7 with a Sikky LSX Swap Kit.
- Mazda FD RX7 Header with Massive 1 7/8″ Primaries
- 3″ Collector, and merge bullet for maximum flow
- 100% Stainless Steel Construction
- CNC Mandrel Bent Tubing
- CNC Stainless Steel Head Flange
- V-Band Flange Pre-Installed (clamp and other half included)
- Includes New Gaskets and Bolts
Fitment Notes:
All Sikky chassis specific swap headers are designed around using the Sikky mount kits and components. We cannot guarantee or confirm fitment when used in conjunction with a competitors product. Double check the required components section to see if anything else is needed for proper fitment. If you are unsure, contact one of our knowledgeable sales reps at sales@akwyr.co
Sikky Toyota Supra MKIV LSx Swap Headers – 1 7/8″ Stainless Steel Pro Series
Regular price $930.00Description
Sikky Pro Series headers allow perfect drop-in fitment in the Toyota Supra MKIV with a Sikky LSx (LS1 / LS2 / LS3 / LS6 / LS7) Swap Kit
- CNC mandrel bent 1 7/8″ Primaries
- 3″ Collector and merge bullets for maximum flow
- 100% Stainless Steel Construction
- V-Band Flange Pre-Installed (clamp and other half included)
- Includes New Gaskets and Bolts
- works with any transmission combination
Fitment Notes:
All Sikky chassis specific swap headers are designed around using the Sikky mount kits and components. We cannot guarantee or confirm fitment when used in conjunction with a competitors product. Double check the required components section to see if anything else is needed for proper fitment. If you are unsure, contact one of our knowledgeable sales reps at sales@akwyr.co
Sikky Nissan 350z LSx Swap Headers – 1 7/8″ Ceramic Coated Mild Steel
Regular price $980.00Description
Sikky headers allow perfect drop-in fitment in the Nissan 350Z with a Sikky LSx (Ls1 / LS2 / LS3 / LS6 / LS7) Swap Kit using a T-56 Transmission. The coating we use is a high performance aluminum ceramic coating.
- Nissan 350Z/Infiniti G35 1 7/8″ Primaries 3.5″ Collector, Mild Steel, Ceramic Coated Header
- 1 O2 Sensor Bung Installed per Header
- V-Band Flange Pre-Installed (clamp and other half included)
- Includes New Gaskets and Bolts
The process in which each header is coated:
- Each part is thermal degreased at 750 degrees for 3 hours to remove any impurities and contaminates. This is the most effective way to clean parts.
- After thermal, each part goes through a series of blast, on all surfaces.
- Once a surface profile is created, the entire part is hand sprayed with Aluminum Ceramic coating.
- After the part is covered, it is put in the oven (60’ long) and cured at 750 degrees for 2 1/2 hours.
- When curing is complete, each part is polished in a vibratory polisher. Using special Ceramic beads, a special soap and water, the part is burnished (polished) to a high luster.
- After polish, it receives a wipe down and inspection before going to shipping.
- 3 year warranty on coatings for corrosion, etc.
Recommended for drag/street use (making 600 WHP)
Fitment Notes:
All Sikky chassis specific swap headers are designed around using the Sikky mount kits and components. We cannot guarantee or confirm fitment when used in conjunction with a competitors product. Double check the required components section to see if anything else is needed for proper fitment. If you are unsure, contact one of our knowledgeable sales reps at sales@akwyr.co
Sikky Nissan 350z LSx Swap Headers – 1 7/8″ Mild Steel
Regular price $680.00Description
Sikky headers allow perfect drop-in fitment in the Nissan 350Z with a Sikky LSx (Ls1 / LS2 / LS3 / LS6 / LS7) Swap Kit using a T-56 Transmission.
- Nissan 350Z/Infiniti G35 1 7/8″ Primaries 3.5″ Collector, Mild Steel
- 1 O2 Sensor Bung Installed per Header
- Includes New Gaskets and Bolts
Recommended for drag/street use (making 600 WHP)
Fitment Notes:
All Sikky chassis specific swap headers are designed around using the Sikky mount kits and components. We cannot guarantee or confirm fitment when used in conjunction with a competitors product. Double check the required components section to see if anything else is needed for proper fitment. If you are unsure, contact one of our knowledgeable sales reps at sales@akwyr.co
Sikky Nissan 350z LSx Swap Headers – 1 3/4″ Ceramic Coated Mild Steel
Regular price $930.00Description
Sikky headers allow perfect drop-in fitment in the Nissan 350Z with a Sikky LSx (Ls1 / LS2 / LS3 / LS6 / LS7) Swap Kit using a T-56 Transmission. The coating we use is a high performance aluminum ceramic coating.
- Nissan 350Z/Infiniti G35 1 3/4″ Primaries 3″ Collector, Mild Steel, Ceramic Coated Header
- 1 O2 Sensor Bung Installed per Header
- V-Band Flange Pre-Installed (clamp and other half included)
- Includes New Gaskets and Bolts
The process in which each header is coated:
- Each part is thermal degreased at 750 degrees for 3 hours to remove any impurities and contaminates. This is the most effective way to clean parts.
- After thermal, each part goes through a series of blast, on all surfaces.
- Once a surface profile is created, the entire part is hand sprayed with Aluminum Ceramic coating.
- After the part is covered, it is put in the oven (60’ long) and cured at 750 degrees for 2 1/2 hours.
- When curing is complete, each part is polished in a vibratory polisher. Using special Ceramic beads, a special soap and water, the part is burnished (polished) to a high luster.
- After polish, it receives a wipe down and inspection before going to shipping.
- 3 year warranty on coatings for corrosion, etc.
Recommended for street use (less than 500 WHP)
Fitment Notes:
All Sikky chassis specific swap headers are designed around using the Sikky mount kits and components. We cannot guarantee or confirm fitment when used in conjunction with a competitors product. Double check the required components section to see if anything else is needed for proper fitment. If you are unsure, contact one of our knowledgeable sales reps at sales@akwyr.co
Sikky Nissan Silvia (RHD) LSx Swap Headers – Stainless Steel Pro Series
Regular price $1,080.00Description
- 100% stainless steel construction
- Massive 1 7/8” primaries
- High flow collectors with merge bullets
- CNC head flanges
- Tig welded
- Right Hand Drive Only
Fitment Notes:
All Sikky chassis specific swap headers are designed around using the Sikky mount kits and components. We cannot guarantee or confirm fitment when used in conjunction with a competitors product. Double check the required components section to see if anything else is needed for proper fitment. If you are unsure, contact one of our knowledgeable sales reps at sales@akwyr.co